Filken Enterprise
6032, Jalan Siantan 1,
Bandar Indahpura,
81000 Kulai,
Johor, Malaysia.
1700-815-006
Taman Anggerik Emas Branch
29, Jalan Anggerik Emas 1,
Taman Anggerik Emas,
81300 Johor Bahru,
Johor, Malaysia.
+6018-389 4613

Felice FLE 106CFV WC Concealed Flush Valve With Vacuum Breaker

Previous 3 / 5 Next

Felice FLE 106CFV WC Concealed Flush Valve With Vacuum Breaker Felice Flush Valve Bathroom


RM797.00

A flush valve is a part inside the tank of a toilet that moves the water into the bowl. Toilet flush valves come in different sizes ranging from 2 to 4 inches, depending on the toilet design. If you are thinking of buying a new toilet pay attention to the type of flush valve it has. In most cases, larger valves move water faster, resulting in a better flush.
When replacing the flush valve in an existing toilet, make sure you get a valve that will work for that specific toilet. Typically, you have to stick to the size that is in there already.


How to Install a Flush Valve
The flush valve, located in the middle of the toilet tank, includes the overflow tube, the hole where water enters the bowl when the toilet is flushed and the rubber tank ball or flapper that covers the hole when the tank is full. A broken flush valve prevents your toilet tank from forming a seal to hold water in the tank. If you hear your tank leaking, first try replacing the flapper. If that doesn't work, replacing your flush valve will help conserve water and keep your toilet operating properly. This guide will teach you how to replace the flush valve in just three easy steps.

1 DRAIN THE TOILET TANK

  • Turn off the water at the shutoff valve and drain tank by flushing the toilet.
  • Disconnect the water supply line with an adjustable wrench.
  • Unscrew the tank bolts using a screwdriver and an adjustable wrench.
 
2 REMOVE THE TOILET TANK
 Remove the toilet tank and gently place it upside down on an old towel or rug. 

3 INSTALL A NEW FLUSH VALVE

  • Unscrew the spud nut with a spud wrench or a pair of slip joint pliers and remove the old flush valve.
  • Slide the cone washer onto the tailpiece of the new flush valve - the beveled side of the cone washer should point toward the end of the tailpiece.
  • Insert the flush valve into the tank opening so that the overflow pipe faces the fill valve.
4 INSTALL A NEW FLUSH VALVE
Screw the spud nut back onto the tailpiece of the new flush valve, tighten with a spud wrench or a pair of slip joint pliers, and place the soft spud washer over the tailpiece.

5 REINSTALL THE TOILET TANK AND REPLACE THE FLAPPER

  • Reinstall the toilet tank and connect water supply line. 
  • Replace the flapper and reconnect the refill tube to the top of the overflow tube.
  • Turn on the water and check for leaks. 
​Felice JB Authorised Dealer!!!
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version